Adhesives & Sealants

Anchorset Green 300

A styrene free, rapid curing, chemical anchoring system, designed for high strength fixing of railings, satellite dishes, signs, brackets and other fixtures which carry heavy loads.

Button

Bathroom & Kitchen Sealant

Available colour: White

A high quality,flexible,water-based sealant that forms a watertight bond to most surfaces.

Button

Ulti Mate Builders Sealant

Colours: Black,Clear & Grey

For interior and exterior sealing of most common materials.

Button

EB25

Available colour : Clear

Designed to be used on virtually any material or surface, EB25 is also certified for use in sanitary and food prep areas and once dried it is resistant to mould

Button

Leadmate

Available colour: Grey

Lead mate sealant is specially formulated as an alternative to mortaring lead flashing and sheet into brick,stone and concrete.

Button

One Hour Caulk 125

Available colour: White

Fast drying flexible decorator's fillerand sealant that remains permanently flexible.

Button

Pinkgrip

Available colour: Pink

Pinkgrip is an exceptional direct bond adhesive using polymers at the leading edge of adhesive technology.

Button

Roof & Gutter Sealant

Colour: Black

A premium sealant and adhesive that provides instant,permanent weather proofing to a wide variety of roofing applications.

Button

Silicone 450

Colours - Brown

A premium quality low modulus, non- corrosive neutral cure silicone that adheres to most substrates - porous and non-porous without the need for priming.

Button

Silicone 500

Available colour: Clear

Mid modulus acetoxy curing silicone sealant that contains a powerful anti-fungal compound to prevent mould & fungal growth in the sealant.

Button

Stixall

Colour: Clear & White

Stixall has the most extreme power to both bond and seal virtually everything to anything.

Button

Weathermate

Colour: Clear

A multi-use adhesive and gap filler based on an advanced isoacrylic formula that provides the ultimate in weather proofing technology for adhesion to all surfaces.

Button

Cement Additives

Accelerator and Frostproofer

A chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C).

Button

Powdered Mortar Tone

A high-quality, permanent colourant designed specifically for use with cement-based products. Available in a range of vibrant shades – Black, Brown, Red, and Yellow Buff

Button

Concrete Hardener & Dustproofer

Formulated from high quality silicate resins to both harden and dustproof new and old concrete floors for both internal and external use. It reacts chemically with the lime content of concrete to form a hard-wearing surface.

Button

Integral Water Resistant Plasticiser

A premium grade integral water resistant plasticiser designed to improve resistance to water penetration both internally and externally, whilst giving all the benefits of a mortar plasticiser.

Button

Extra Strength Liquid Mortar Plasticiser

A chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increase their resistance to freeze-thaw cycles

Button

PVA

A general purpose bonding agent, and additive for concrete and plasters and as a multi-use primer adhesive, its used for bonding and priming all common construction materials

Button

SBR

A versatile product, which increases flexibility of cement screeds and mortars. Its formula improves durability and chemical and water resistance.

Button

Stabilising Solution

A microscopically fine polymer emulsion which penetrates dusty/chalky and badly weathered surfaces to leave a stable sound base for decoration with paint, wallpaper, tiling etc

Button

Cleaners & Sealers

Bitumen Joint Sealer

Ultracrete SCJ is designed to be applied onto vertical edges and surface bases before the application of asphalt. This helps to prevent water ingress, which in turn improves bond strength and prolongs the life of your repair, combating freeze thaw damage.

Button

Block Guard

A clear solvent based acrylic coating designed to bind jointing sand and form a durable seal over block paving and other mineral paver/flags. It penetrates deeply into pavers and jointing sand and then cures by solvent evaporation.

Button

High Strength Brick Acid

A super strength (16% hydrochloric acid) cleaner for removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete

Button

Indian Stone Sealer

A solvent-free, advanced Fluoro polymer-based formulation used to seal and protect patios, particularly for high-quality natural stone. Gives a high level of protection against water and oil penetration.

Button

Mould Release Oil

A high quality chemical release agent for use on all types of standard formwork materials and mould and shutter surfaces prior to casting concrete, giving a clean release.

Button

Monster Wipes

Heavy duty strength wipes, suitable for cleaning up paint, adhesive, sealant, expanding foam, bitumen, oil, grease and much more!

Button

Patio Blaster

A concentrated disinfectant for the removal and prevention of green mould, black mould, lichens and algae on hard surfaces.

Button

Patio Seal

A solvent‐free, acrylic liquid used to seal and protect patios, paths, natural stone, concrete and block paving from sunlight, water, oil, petrol and fungal growth.

Button

Triple Action Wood Treatment

A solvent-free, low-odour solution based on Micro-fine active technology with added fungicides, algaecides and Permethrin to actively kill and protect against wood rot, decay, fungi and wood-boring insects.

Button

Silicone Ultra Waterseal

A silicone based water

repellent for external application. Prevents the ingress of rain and

moisture into the wall, whilst permitting the evaporation of water

vapour out of the wall, keeping walls drier, warmer and preventing

water damage

Button

Waterseal

A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost.

Button

Expanding Foam

Foam Gun Cleaner

A high strength, universal solvent cleaner that will dissolve and remove uncured PU foam from applicator guns

and surfaces.

Button

B2 Fire Foam

A quick-setting one-part polyurethane foam with fire resistance properties. The foam expands on application 1.5 - 2 times its original volume.

Button

B3 Fill & Fix

A fast setting, multi‐purpose PU foam which bonds, fills, seals and insulates most construction materials.

Button

Mega Foam

A quick setting, multi-purpose polyurethane foam designed for the bonding, sealing, filling and insulating of most construction materials

Button

Mega Stik

A fast curing adhesive foam that has been specially developed for the rapid installation of plasterboard, insulation boards, floorboards and roof decking. Supplied in an aerosol can, application is by universal foam gun.

Button